• <bdo id="6w4op"><optgroup id="6w4op"><thead id="6w4op"></thead></optgroup></bdo>
    <tbody id="6w4op"><div id="6w4op"><td id="6w4op"></td></div></tbody>
  • <bdo id="6w4op"><optgroup id="6w4op"><thead id="6w4op"></thead></optgroup></bdo>

    <track id="6w4op"><div id="6w4op"><td id="6w4op"></td></div></track>

        1. 您现在所在的位置:首页--(水平对整加旋转/快速换模)DX-3型 定子整形机

          (水平对整加旋转/快速换模)DX-3型 定子整形机

          上传时间:2019-06-03



          DX-3 Model Stator Forming Machine

           

          本机适用于发电机定子线圈嵌线后,线圈端部整形的专用设备。采用三菱PLC程控,中文液晶显示界面,本机有水平向心推进来整上下绕组的外形,由上下模整定子绕组内径,水平动作一致,后旋转180°再动作一次完成,更换工装仅四个零件,极为方便,适合多品种生产。

           

          Suitable for generator stator coil embedded line, the coil end of the special equipment shaping.Mitsubishi PLC program control, the Chinese LCD display interface, the machine has a horizontal to the heart to promote the shape of the upper and lower winding, the stator winding stator diameter, Four parts, very convenient, suitable for multi-species production.



          技术参数/Technicai Parameters


          电源电压Supply voltage AC380V±10% 50Hz

          总功率Total power

          3kw

          液压压力Hydraulic Pressure 

          0~7MPa
          最大定子内径Max.Stator ID ≤Φ120 mm
          最小定子内径Stator ID

          ≥Φ60 mm

          定子叠厚Core thickness

          15~60mm



          扫一扫关注我们
          Copyright © 2014 浙江巨龙自动化设备股份有限公司 All Rights Reserved 备案号:浙ICP备11012977号-1

          浙公网安备 33102202000120号